Defining Batch Data Fields; Merged Or Sub-Fields - Avery Dennison ADTP1 Reference Manual

E9. cable_det
E10.rotate_img
Example E,0,1,4,2,3,0,0,0,0 |
Defines a batch control field. Continuous feed mode is used and a separator prints between
batches. Four tags have the same image and there are two identical parts on one tag. The cutter
cuts after every tag. The image is not rotated.
D e f i n i n g B a t c h D a t a F i e l d s
Batch data fields should be sent in field number order. Use continuation fields for large amounts
of data. If using N (New) in the batch header, list all fields with the data in sequence. If using U,
list only those fields and data that changes from the last printed batch.
Syntax
field#,"data string" |
C,"continuation" |
field#
"data string"
C
"continuation"
Example 1,"Size 12" |
2,"" |
3,"Blue" |
C,"and this would be appended." |
Defines a batch data field. "Size 12" prints in field #1, a blank line appears in field #2, "Blue and
this would be appended" prints in field #3.

Merged or Sub-Fields

If a field is completely filled by data copied from other fields, use quotation marks without spaces
between them for the "data string" parameter.
6-6 Packet Reference Manual
Bar code verifier cable detect. The printer can be set to detect
when a bar code verifier's cable is disconnected. For more
information about connecting the verifiers cables, refer to the
Verifier's Operating Instructions. 0 is the default. Options:
0 The printer does not detect when a cable is disconnected
1 I/O cable is disconnected
2 I/O and/or data cables are disconnected
Image rotation. Rotates the printed image 180°. Design formats
as needed, so image rotation is not required. 0 is the default.
Options:
0 No rotation
1 180° rotation
Note: The format length and width must exactly match the loaded
supply or the rotated image does not print correctly.
Identifies the text, bar code, or non-printable text field in which to
insert the following data. Range: 1 to 999.
Provides the actual information to appear in fields. Enclose in
quotation marks. Length: 0 to 2710 characters. "" is the default.
Identifies information to be appended to the data string. This
parameter is optional.
Provides the actual information to be added to the batch packet.
Enclose in quotation marks. Use this option to break up longer
fields. Length: 0 to 2710 characters. "" is the default.
parameter is optional.
This