Avery Dennison ADTP1 Reference Manual page 51

T7. gap
Note:
T8. font
T9. hgt mag
T10. wid mag
Number of dots between characters in 203 dpi (or 300 dpi).
Range: 0 to 99.
0 is the default.
For monospaced fonts, the additional spacing is added to the
existing inter-character gap. This is also true for proportionally
spaced fonts; however, the inter-character gap varies with
character combinations.
Any number other than 0 affects the field width. Default spacing:
Standard
Reduced
Bold
OCRA-like
CG Triumvirate™ Typeface Bold
CG Triumvirate™ Typeface
Style of font. 1 is the default. Options:
1 Standard
2 Reduced
3 Bold
4 OCRA-like
5 HR1
6 HR2
Or a valid downloaded font selector number.
Fonts 5 and 6 are for numeric data only. The CG Triumvirate™
typefaces support only the ANSI and DOS Code Page 437 and
850 Symbol Sets. The scalable font does not support Code Page
1256 (Arabic). See
Height magnifier, 1 to 7 times (4 to 255 points for
scalable/downloaded TrueType fonts). 1 is the default. Use a
magnifier of 1 with proportionally spaced fonts, because
characters lose smoothness at higher magnifications. See
Appendix B, "Fonts," for more information about fonts.
Width magnifier, 1 to 7 times (4 to 255 points for
scalable/downloaded TrueType fonts). 1 is the
default.Proportionally spaced fonts do not have a set width. To
estimate the size of the field, use the letter "W" for the widest
field or an "L" for an average width field. Find the selected font
and the desired width in Appendix B, "Fonts."
3 dots
1 dot
3 dots
3 dots
varies with each letter
varies with each letter
10 CG Triumvirate™ Typeface Bold
11 CG Triumvirate™ Typeface
15 7 pt. CG Triumvirate™ Typeface
16 9 pt. CG Triumvirate™ Typeface
17 11 pt. CG Triumvirate™ Typeface
18 15 pt. CG Triumvirate™ Typeface
50 EFF Swiss Bold (TrueType® Scalable)
56 PaxarSymbols
Appendix C for more information.
Defining Fields 3-3