Uploading Format Header Information - Avery Dennison ADTP1 Reference Manual

U p l o a d i n g F o r m a t H e a d e r I n f o r m a t i o n
Upload format header information from the formats in memory to check the supply length and
width for each format. Formats stored in flash memory are loaded into RAM when the printer
boots. However, the formats remain in flash memory when the printer is turned off.
Syntax
{header,format#,action,device | }
F1. header
F2. format#
F3. action
F4. device
Example
{F,0,H,Z | }
Selects all formats in memory and returns the following:
Example
{F,0,H,Z |
Fmt_1,406,406 |
Fmt_10,324,406 |
Fmt_15,812,812 |
Fmt_20,305,609 |
Fmt_25,1218,406 | }
Displays the format number, supply length and supply width (in dots) for each format in memory.
Example
{F,1,H,Z | }
Selects format1 and returns the following to the host:
{F,1,H,Z |
Fmt_1,406,406 | }
Displays the supply length and supply width (in dots) for format1.
2-26 Packet Reference Manual
Format Header
Format number from 0 to 999. 0 is for all formats in memory.
Action. Options:
A Adds the specified format
C Clears the specified format
H Uploads format header information
Device. Options:
F Flash
R Volatile RAM
Z All devices (use for upload)