Status Polling Considerations For Script Mode - Avery Dennison ADTP1 Reference Manual

S t a t u s P o l l i n g C o n s i d e r a t i o n s f o r S c r i p t M o d e
The following table shows the effects of the I Packet and the printer's front panel (or keyboard)
on status polling and immediate commands.
Configuration Packet
(inside the script or sent
online to the printer)
Status OFF (status polling not
Polling enabled by I packet)
ON (status polling
enabled by I packet)
Immediate OFF (immediate
Commands
commands not enabled
by I packet)
ON (immediate
commands enabled by I
packet)
If status polling and immediate commands are NOT enabled through the I Packet, enabling status
polling and immediate commands at the printer's front panel has NO effect.
I Packet Printer While Running in Script Mode ONLY
(set through printer's front panel)
Disabled
OFF (status polling
not enabled through
printer's front panel)
OFF (status polling
not enabled through
printer's front panel)
OFF (immediate
commands not
enabled through
printer's front panel)
OFF (immediate
commands not
enabled through
printer's front panel)
Enabled
OFF (status polling
enabled through printer's
front panel)
ON (status polling
enabled through printer's
front panel)
OFF (immediate
commands enabled
through printer's front
panel)
ON (immediate
commands enabled
through printer's front
panel)
Status Polling 7-9