Avery Dennison ADTP1 Reference Manual page 54

T15. sym set
Example
T,2,10,V,250,80,0,1,1,1,B,C,0,0,0 |
Defines a text field (field #2) with a variable length of up to 10 characters. The field begins at
row 250, column 80. There is no additional gap between characters, and the Standard font is
used without any additional magnification. The printing is black on white and centered. No field
or character rotation is used. The internal symbol set is used.
3-6 Packet Reference Manual
Symbol set. 0 is the default (Internal Symbol Set).
For scalable or TrueType® fonts, use:
1 ANSI Symbol Set
100 Macintosh
101 Wingdings
102 Unicode (user input) for particular mapping
103 BIG5 (user input) for Unicode mapping
104 GB2312 (user input) for Unicode mapping
105 SJIS (user input) for Unicode mapping (CP 932, Japanese)
106 GB2312 (user input) for GB2312 mapping (CP 936,
Simplified Chinese)
107 BIG5 (user input) for BIG5 mapping (CP 950, Traditional
Chinese)
108 KSC (user input) for KSC mapping (CP 5601 Korean)
110 Unicode UTF-8
437 DOS Code Page 437 (Domestic)
850 DOS Code Page 850 (International)
852 DOS Code Page 852 (Latin 2)
855 DOS Code Page 855 (Russian)
857 DOS Code Page 857 (IBM Turkish)
860 DOS Code Page 860 (MS-DOS Portuguese)
1250 Code Page 1250 (Latin 2)
1251 Code Page 1251 (Cyrillic)
1252 Code Page 1252 (Latin 1)
1253 Code Page 1253 (Greek)
1254 Code Page 1254 (Turkish)
1255 Code Page 1255 (Hebrew)
1256 Code Page 1256 (Arabic)
1257 Code Page 1257 (Baltic)
1258 Code Page 1258 (Vietnam)
Note: The Standard, Reduced, Bold, OCRA and HR fonts only support
the Internal Symbol Set (0). The CG Triumvirate™ typefaces only
support the ANSI (1) and DOS Code Page 437 (2) and 850 (3)
Symbol Sets. The scalable font (font#50) does not support Code
Page 1256 Arabic (10).
Code pages 852-860 and 1250-1258 are for downloaded
TrueType fonts or the scalable font. Code pages 102-110 require
a downloaded International TrueType font. TrueType fonts are
designed to be regionally specific; therefore, all code pages may
not be supported in a given font. See Appendix C,
Code Pages" for more information.
If using symbol set 110 (Unicode UTF-8), set the MPCL control
characters (start of header, etc.) to decimal values between 0
and 128; otherwise, errors may occur with the Unicode data
entered. See Chapter 2,
information about the MPCL control characters.
"Configuring the Printer" for more
"Symbol Sets/