Using Option 6 (Upload Field Data) - Avery Dennison ADTP1 Reference Manual

U s i n g O p t i o n 6 ( U p l o a d F i e l d D a t a )
Upload data from any field using Option 6. When uploading multiple fields of data, the data is
comma separated.
Data is uploaded to the last port that received host data (serial, USB, or Ethernet) at the end of
the batch or label, depending on the other options used as follows:
♦ When using a batch quantity of one without Option 60, data is uploaded at the end of the
batch.
♦ When using a batch quantity greater than one with Option 60, data is uploaded after each
label.
Note: To upload data on a field that did not change, apply Option 60 to that field.
If a printing error occurs, the error number is uploaded instead of the data.
Syntax
R,6,device |
R1. R
R2. 6
R3. device
Example
T,2,10,V,250,50,0,1,1,1,B,C,0,0,0 |
R,6,H |
Uploads the text field's data to a file.
Example
B,3,12,F,50,50,1,2,60,7,L,0 |
R,6,H |
R,60,I,0 |
Uploads the UPCA bar code field's data to a file and uploads data for each label in the batch.
Example
T,150,V,230,130,0,1,1,1,B,L,0,0 |
R,5,R |
R,6,H |
Reads the RFID data from the RFID chip embedded in the supply. Uploads the data to the last-
used port.
Example
{F,1,A,R,E,600,400,"RDCI" |
X,5,24,0 |
T,6,20,V,415,270,0,50,15,15,B,L,0,2 |
R,4,5,1,16,1,0 |
R,6,H | }
Copies data from field 5 (RFID Data Field) to field 6 (Text field). Uploads the data to the last-
used port.
Sample Upload Packet
Example
R,5,R |
R,6,H |
Returns the following pre-programmed data in the RFID chip in the upload packet:
313233343536373839303132
Example
B,3,12,F,50,50,1,2,60,7,L,0 |
R,6,H |
Returns the following UPCA bar code data entered from the batch in the upload packet:
123456789012
4-6 Packet Reference Manual
Option Header.
Option 6.
Last port that received host data. Use H (host).