Defining The Graphic Field - Avery Dennison ADTP1 Reference Manual

D e f i n i n g t h e G r a p h i c F i e l d
The graphic field in a format references the graphic image by the graphID in the graphic header.
This field is required only if the graphic will be stored in RAM.
Syntax
G,graphID,row,col,mode,rotation |
G1. G
G2. graphID
G3. row
G4. column
G5. mode
G6. rotation
Example G,57,0,0,0,0 |
Defines a graphic field that is identified by the number 57. The image begins at 0,0. The imaging
mode is 0 and there is no rotation.
S a m p l e B i t m a p G r a p h i c I m a g e
The following format shows the wire hex graphic packet included.
{F,2,A,R,E,400,400,"FMT2" |
G,99,227,35,0,0 |
Q,240,15,300,125,10," " |
T,1,5,V,285,137,0,10,2,2,B,L,0,0,0 |
T,2,5,V,255,137,0,10,2,2,B,L,0,0,0 |
T,3,15,V,180,25,0,10,1,2,B,L,0,0,0 |
T,4,15,V,121,35,0,1,3,1,B,L,0,0,0 |
L,S,94,15,94,235,10,"" |
B,5,12,F,50,65,1,2,40,1,L,0 | }
Sample Batch Packet
{B,2,N,1 |
1,"Pat's" |
2,"Parts" |
3,"3/8 inch Wire" |
5-12 Packet Reference Manual
Graphic Field.
Unique number from 1 to 999 to identify the graphic image. 1 is
the default.
Distance between the bottom of the print area on the supply to
the bottom of the graphic image. 10 is the default. Measured in
selected units.
English 0 – 1599
Metric 0 – 4063
203 Dots 0 – 3247
300 Dots 0 – 3599
The row specified in the constant text, bitmap, line, or box field is
added to the row value above to determine the actual position in
the format.
Distance between the left edge of the print area on the supply
and the left edge of the graphic. 10 is the default.Measured in
selected units. The column specified in the constant text,
bitmap, line, or box field is added to the col value above to
determine the actual position in the format.
English 0 – 409
Metric 0 – 1039
203 Dots 0 – 831
300 Dots 0 – 1247
Imaging mode. Enter 0.
The orientation of the graphic on the supply. Enter 0.
Referenc e to the gr aphic packe t
4,"3.55/8 Pack" |
5,"345911871209" | }