Avery Dennison ADTP1 Reference Manual page 68

B12. field rot
B13. type
B14. sep_height
B15. segment
Example
B,3,12,V,50,40,1,2,80,7,L,0 |
Defines a bar code field (field #3) with 12 characters of variable length starting at row 150,
column 40. A UPCA bar code with a density of 2 and a height of 80 is used. The check digit and
number system are shown at the bottom. The bar code is left aligned without any field rotation.
3-20 Packet Reference Manual
Field rotation. Field rotation rotates the whole field, not just the
characters. Rotation is affected by the pivot point, which varies
depending on how text is justified. Lower left corner of field is
the pivot point. 0 is the default. Options:
0 Top of field points to top of supply (use for MaxiCode)
1 Top of field points to left of supply
2 Top of field points to bottom of supply
3 Top of field points to right of supply
Note: Serial bar codes with an 8-dot narrow element do not
automatically print at 2.5 IPS. Serial bar codes printed at speeds
greater than 2.5 IPS may not scan properly.
Select from the bar code family. This parameter only applies to
the GS1 DataBar bar code. 1 is the default. For other bar
codes, do not include this parameter. Options:
1 GS1 DataBar 14
2 GS1 DataBar 14 Truncated
3 GS1 DataBar 14 Stacked
4 GS1 DataBar 14 Stacked Omni directional
5 GS1 DataBar Limited
6 GS1 DataBar Expanded
7 UPCA
8 UPCE
9 EAN13
10 EAN8
11 UCC/EAN128 and CC A/B
12 UCC/EAN128 and CC C
Height of the separator between the linear bar code and 2D bar
code. This parameter only applies to the GS1 DataBar bar code.
For other bar codes, do not include this parameter. The value is
1 or 2. 1 is the default.
Width of the segment. This parameter only applies to the GS1
DataBar bar code. For other bar codes, do not include this
parameter. The range is even numbers from 2 to 22. 22 is the
default.