Batch Errors; Option Errors - Avery Dennison ADTP1 Reference Manual

Error Description
Code
040 Line thickness must be 0 to 99 dots.
041 Line direction must be 0, 90, 180, or 270.
042 End row is invalid. Line segment or box end row is defined outside of printable area.
043 End column is invalid. Line segment or box end column is defined outside of printable
area.
044 Dot pattern for line or box must be "".
045 Line length is defined beyond the maximum length. See "Defining Line Fields" in
Chapter 3 for valid lengths.
046 Line type must be S (segment) or V (vector).
051 Imaging mode in the graphic header must be 0.
052 Data type in the RFID Data Field must be 0.

Batch Errors

Error Description
Code
101 The format referenced by batch is not in memory.
102 Print quantity is outside the range 0 to 32000.
104 Batch mode must be N (new) or U (update).
105 Batch separator in a batch control field must be 0 (Off), 1 (On), or 2 (Double-length).
106 Print multiple is outside the range 1 to 999.
107 Cut multiple is outside the range 0 to 999. Only valid for printers with a cutter.
108 Multiple part supply is outside the range 1 to 5.
109 Cut type is outside the range 0 to 5.
110 Image rotation must be 0 (no rotation) or 1 (180° rotation) in the batch control field.

Option Errors

Error Description
Code
200 Option number must be 1 - 7, 20, 21, 30, 31, 42, 50, 51, 52, 53, 60, 61 or 62.
201 Copy length is outside the range 0 to 2710.
202 Copy start position must be 1 to 2710.
203 Destination start position must be 1 to 2710.
204 Source field must be 0 to 999.
205 Copy type must be 1 (copy after rules) or 2 (copy before rules).
206 Increment/Decrement selection must be I (increment) or D (decrement).
207 Incrementing start position must be 0 to 2710.
208 Incrementing end position must be 0 to 2710.
209 The incrementing amount must be 0 to 999.
210 Security value for a PDF-417 bar code must be 0 to 8. Correct the value and resend the
format to the printer.
Diagnostics & Errors 8-5