Designing Bitmapped Images; Special Considerations - Avery Dennison ADTP1 Reference Manual

D e s i g n i n g B i t m a p p e d I m a g e s
After determining the encoding method to use, map out the graphic
image.
Note: The mapped image must be an upside down mirror image of
the final result.

Special Considerations

Solid black print cannot exceed 30% of any given square inch of the
supply. If the black print exceeds this limit, you may lose data or damage the printhead.
In the first label, the large "M" logo and thick black line exceed the allowed black to white print
ratio. In the second label, the large "M" logo does not exceed the black to white print ratio.
Exceeds
limit
Exceeds
limit
5-2 Packet Reference Manual
2 inches
Does not
exce ed
limit
Does not
exce ed
limit
2 inches
0.5"