Setting The Printer's Supply Type/Calibrating Supply - Avery Dennison Monarch 9419 Manual

S e t t i n g t h e P r i n t e r ' s S u p p l y T y p e / C a l i b r a t i n g S u p p l y
Calibrating supply must be done on the initial printer setup, any time the printer has been
reset, or whenever the supply type is changed (from die cut to black mark for example) or
from tags to labels. The printer automatically calibrates when you set the printer's supply
type. The supply type must match the loaded supplies. Supply types include:
Gap
Black Mark
Continuous
From the Main Menu, select Menu.
1.
Press the navigation button until Media Setup is highlighted. Press Select.
2.
3. Press Select when Supply Type is highlighted.
4. Use the navigation button to select your supply type. Press Select when finished.
The printer displays "Calibrating" while it calibrates the supply.
Press Back until you see the Main Menu.
5.
Use for die cut supply. The supply has a rounded edge. The supply is
sensed using the gap between labels.
Use for black mark supply. Black mark supply has marks on the back
of supply for sensing. The supply is sensed using the black marks.
Tag supply commonly uses black marks.
Use for non-indexed (no sense mark) supplies. Continuous supply
does not have any index marks for sensing or perforations.
Loading Supplies 2-11