Setting The Supply Type - Avery Dennison Monarch 9419 Administrator's Manual

S e t t i n g t h e S u p p l y T y p e
Set the printer's supply type to match the loaded supplies.
Note: The printer automatically calibrates the sensor based on the selected supply
type.
Select For
Gap Die cut supplies have a rounded edge. The supply is sensed using
the gap between labels.
Black Mark Black marks on the back of the supply for sensing. The supply is
sensed using the black marks. Tag supply commonly uses black
marks.
Continuous Continuous supply does not have any index marks for sensing or
perforations.
3-2 Offline Mode System Administrator's Guide