Suzuki 2006 SX4 Service Manual page 447

6) Pull out wheel hub (1) with special tools.
Special tool
(A): 09943–17912
(B): 09942–15511
CAUTION
!
When wheel hub is removed, replace wheel
bearing with new one.
7) Disconnect tie-rod end (1) from steering knuckle (2)
with puller (3).
1
2
8) Remove wheel speed sensor (1) from knuckle.
10) Remove ball joint bolt (4) and washer (3).
12) Uncaulk and remove dust cover (1).
I2RH01220028-01
1
3
13) Remove circlip from knuckle.
14) Using hydraulic press (1) and special tool, remove
I4RS0A220017-01
1
I5RW0A220013-01
9) Loosen strut bracket nuts (1).
11) Remove strut bracket bolts (5) from strut bracket and
then steering knuckle (2).
5
2
F
F: Vehicle front
wheel bearing.
Special tool
(A): 09913–75510
(B): 09943–37910
Front Suspension: 2B-10
1
3
4
I7RW01220004-01
I2RH01220032-01
I5RW0A220014-01