Center Shaft And Center Bearing Support - Suzuki 2006 SX4 Service Manual

15) Fasten differential side (or center shaft side) boot big
band (1) and small band (5) by drawing hooks (2)
with special tool and engage hooks (3) in slot and
window (4).
Special tool
(A): 09943–57021
(A)
1
(A)
5
4
2
3
4
2
3
I4RS0B310008-02
Drive Shaft / Axle: Front 3A-12

Center Shaft and Center Bearing Support

Disassembly and Reassembly (If Equipped)
Disassembly
1) Using hydraulic press (1), draw out center shaft (2)
from center bearing.
2) Remove oil seals from center bearing support (3).
3) Remove bearing support circlip (1) using snap ring
pliers (2).
4) Remove center bearing from center bearing support.
Reassembly
Install center shaft by reversing removal procedure and
noting the following points.
• When installing bearing support circlip (1), make sure
that if fits in circlip groove in center bearing support (2)
securely as shown.
1
S6RW0D3116005
I3RM0A310012-01
I7RW01311005-01
2
I5RW0A311006-01