Ricoh D146 Service Manual page 468

Image Adjustment
Highlight (Low ID)
4
(K, C, M, and Y)
K Highlight (Low ID)
(C,M, and Y)
5
<on the full color
copy>
- Photo Mode, Single Color -
Item to Adjust
1 ID max: (K)
Middle (Middle ID)
2
(K)
Shadow (High ID)
3
(K)
D146/D147/D148/D149/D150
Level on the C-4 chart
4-174
Adjust the offset value so
that dirty background does
not show on the copy and
the density of level 3 is
slightly lighter than that of
level 3 on the C-4 chart.
Adjust the offset value so
that the color balance of
black scale levels 3 through
5 in the copy is seen as gray
(no C, M, or Y should be
visible). If the black scale
contains C, M, or Y, do steps
1 to 4 again.
Adjustment Standard
Adjust the offset value so
that the density of level 10
matches that of level 10 on
the C-4 chart.
Adjust the offset value so
that the density of level 6
matches that of level 6 on
the C-4 chart.
Adjust the offset value so
that the density of level 8
matches that of level 8 on
the C-4 chart.
SM