Audi TT 2007 Repair Manual page 80

Audi TT 2007 ➤
Manual Transmission - Edition 10.2009
9 - Bolt
❑ Connecting bar to body
❑ Tightening specification, refer to ⇒ Engine Mechanical; Rep. Gr. 10 ; Description and Operation
10 - Bolt
❑ Engine mount to body
❑ Tightening specification, refer to ⇒ Engine Mechanical; Rep. Gr. 10 ; Description and Operation
11 - Bolts
❑ Engine mount to engine support
❑ Tightening specification, refer to ⇒ Engine Mechanical; Rep. Gr. 10 ; Description and Operation
12 - Pendulum Support
❑ Removing and installing, refer to
13 - Bolt
❑ Replace
❑ 100 Nm plus an additional 90° turn
❑ Pendulum support to subframe
14 - Bolt
❑ Replace
❑ 60 Nm plus an additional 90° turn
❑ Transmission mount to transmission console
15 - Bolt
❑ Replace
❑ 40 Nm plus an additional 90° turn
❑ Transmission mount to body
16 - Transmission Mount
❑ Removing, refer to
❑ Installing, refer to
17 - Bolt
❑ Transmission console to transmission
❑ 60 Nm plus an additional 90° turn
❑ Replace
18 - Transmission Bracket
Transmission with Threaded Inserts (for example HeliCoil) for
Securing the Pendulum Support
Note
The holes for the pendulum support from transmission build
♦
date 5/28/07 always have threaded inserts (for example Heli‐
Coil).
How to recognize: collar on the first thread -arrow-.
♦
Different securing bolts and tightening torques -2-
♦
⇒ page 72 .
74
Rep. Gr.34 - Controls, Housing
⇒ "4.10 Pendulum Support", page 117
⇒ "4.8 Transmission Mount, Removing", page 113
⇒ "4.9 Transmission Mount, installing", page 116
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.