Audi TT 2007 Repair Manual page 243

– Coat the new nut for the output flange with locking fluid and
then tighten; locking fluid. Refer to the electronic parts catalog
ETKA.
– Replenish axle oil after installation of the bevel box. Refer to
⇒ "1.3 Gear Oil in Bevel Box, Filling", page 49
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Manual Transmission - Edition 10.2009
.
Audi TT 2007 ➤
3. Removal and Installation
237