Audi TT 2007 ➤
Manual Transmission - Edition 10.2009
13 - Slide Shoe
14 - Bushing
15 - Lock Elbow
❑ For adjustment of shift mechanism, refer to
Remove the Lock Washer for the Selector Relay Lever
– Lift on the circlip -arrow-.
Installing the Transmission Shift Lever
– When positioning the transmission shift lever, make sure the
gap -arrow A- is placed over the missing selector shaft teeth
-arrow B-.
Installation Position of Transmission Shift Lever/Selector Relay
Lever
1 - Transmission shift lever with balance weight
2 - The selector relay lever engages in the transmission shift lever
slide rail via the slide shoe -arrow-.
– Lubricate the slide rail and slide shoe -arrow- with grease -G
000 450 02- .
64
Rep. Gr.34 - Controls, Housing
⇒ "2.8 Shift Mechanism, Adjusting", page 69
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.