Audi TT 2007 ➤
Manual Transmission - Edition 10.2009
Flattened areas on the grooved ball bearing -A- and bearing seat
-B- in the transmission housing approximately from transmission
build date 2.21.08.
•
If the flattened areas are present, do not insert any spacer
washers above and below the grooved ball bearing.
178
Rep. Gr.35 - Gears, Shafts
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.