Audi TT 2007 Repair Manual page 115

– Insert and tighten lower engine/transmission connecting bolts
-1-3-, then tighten all remaining connecting bolts
⇒ page 112 .
– Lubricate the bearing areas and sliding surfaces of selector
relay lever -1- with grease -G 000 450 02- .
Metal selector relay lever
– Insert selector relay lever -1- and secure with the lock washer
-arrow-.
Plastic selector relay lever -1-
– Insert the selector relay lever with catch
– Insert the selector relay lever with clip
All Vehicles
– Install the transmission bracket -arrows-. Refer to
⇒ "2.9 Subframe Mount Assembly Overview", page 72
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
⇒ page 68
⇒ page 69
.
Manual Transmission - Edition 10.2009
4. Removal and Installation
Audi TT 2007 ➤
109