Audi TT 2007 ➤
Manual Transmission - Edition 10.2009
♦ Guide Pin -VW 436 A-
♦ Guide Pin -VW 439-
♦ Slide Hammer-Complete Set -VW 771-
♦ Holding Fixture -VW 801-
♦ Guide Pin -10 - 15-
♦ Thrust Pad -3124-
♦ Driving Sleeve -VW 244 B-
♦ Thrust Plate -VW 401-
♦ Thrust Plate -VW 402-
♦ Punch -VW 407-
♦ Sleeve -VW 416 B-
♦ Driver -3264-
♦ Subframe Support Assm. Device -3290-
♦ Drift -T10168-
♦ Drift -T10169-
♦ Thrust piece -T10203-
♦ Kukko 21/2 Internal puller and Kukko 21/4
♦ Kukko 22/2 counter-support
♦ Drift -T10362-
Removing Cap -A-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
– Knock rubber through at center of sealing cap using a screw‐
with respect to the correctness of information in this document. Copyright by AUDI AG.
driver -B- and pry out cap in direction of -arrow-.
Driving In Sealing Cap
– Drive in sealing cap up to the stop.
Removing Lock Elbow for Selector Shaft
– Break off the pin in released position.
153
5. Disassembly and Assembly