Audi TT 2007 Repair Manual page 149

♦ Extractor Lever -VW 681-
♦ Oil Collecting and Extracting Device -V.A.G 1782-
♦ Socket and Key -T10107 A-
Removing
• Transmission removed, refer to
⇒ "4.4 Transmission, Removing", page 96
assembly stand
⇒ "4.6 Transmission, Securing to Assembly Stand",
page 107 .
– Rotate transmission in assembly stand with oil drain plug
downward.
– Place drip tray underneath.
– Drain gear oil from manual transmission.
– Remove the right flange shaft bolt with the -T10107 A- .
– Remove 4 bevel box connecting bolts -arrows- (only 3 shown
in illustration) at manual transmission.
– Carefully press bevel box off manual transmission while pro‐
tecting it against falling through.
– Remove the clutch slave cylinder with the release bearing
-arrows-.
and secured to the
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Manual Transmission - Edition 10.2009
5. Disassembly and Assembly
Audi TT 2007 ➤
143