Audi TT 2007 Repair Manual page 163

Pulling Out Bushing for Selector Shaft
– Hold spindle of assembly tool -3290- firmly in place and screw
nut -B-.
A - Internal puller 14.5 to 18.5 mm , for example -Kukko 21/2-
Driving In Bushing for Selector Shaft
– Drive selector shaft bushing -A- in flush.
Driving Out Sealing Plug
– Drive the sealing plug -1- from the inner side of the transmis‐
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
sion housing toward the outside -arrow-.
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Driving In Sealing Plug
Manual Transmission - Edition 10.2009
5. Disassembly and Assembly
Audi TT 2007 ➤
157