Audi TT 2007 Repair Manual page 74

Audi TT 2007 ➤
Manual Transmission - Edition 10.2009
– Remove shift cable lock washer -3- from transmission shift
lever -1- by lifting the clip.
– Remove shift cable -2- from the pin -arrow-.
Securing
Note
Replace the lock washer for the shift cable.
♦
Coat the pin -arrow- with a small amount of grease -G 000 450
♦
02- .
– Press the shift cable onto transmission shift lever -2- and se‐
cure with lock washer -1-.
Remove the Selector Relay Lever with Catch from the Transmis‐
sion Shift Lever -arrow 1- and Attach
Removal
– Press in the catch -arrow 1- to the stop and remove the se‐
lector relay lever together with the control cable retainer. Move
the selector relay lever in the operating direction.
Note
Ignore -arrow 2-.
Securing
Note
To install, grease mounting points and contact surfaces with
Grease -G 000 450 02- .
– Press the control cable retainer onto the selector relay lever
⇒ page 69
– Insert the selector relay lever together with the control cable
retainer to the stop.
• The catch -arrow 1- secures the selector relay lever.
• The catch -arrow 2- secures the control cable retainer.
• Make sure it engages securely.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
68
Rep. Gr.34 - Controls, Housing