Audi TT 2007 Repair Manual page 56

Audi TT 2007 ➤
Manual Transmission - Edition 10.2009
Note
Cover area below oil filler bolt -arrow- with a cloth.
– Place the -V.A.G 1782- under the bevel box.
– Remove oil filler bolt -arrow- in bevel box.
– Disconnect adapter -A- and elbow -B-.
– Install adapter -A- to stop.
– Engage elbow -B- with adapter -A-.
• Hose must not hang through.
– Make sure valve -arrow- is closed.
– Screw oil container -A- onto the -VAS 6291- .
– Now open valve -arrow- and hold oil container as shown in
illustration.
Bevel box is now filled.
• When bevel box is filled correctly, oil escapes at adapter -A-.
– Once oil has escaped at adapter -A-, place oil reservoir on a
low surface so some of the excess oil can flow out of the hose
back into the oil reservoir.
50
Rep. Gr.34 - Controls, Housing
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.