Audi TT 2007 Repair Manual page 33

Removal Instructions for Dual-Mass Flywheel
Note
To prevent damaging the dual-mass flywheel when removing, the
bolts -B- must not be removed using an air or impact driver. Re‐
moval of the bolts is only permissible by hand.
– Turn the dual-mass flywheel -A- so that the bolts are posi‐
tioned centrally to the bores -arrows-.
– When removing the bolts, make sure that no bolt head con‐
tacts the dual-mass flywheel, otherwise it may be damaged
when the bolt is turned further.
Manual Transmission - Edition 10.2009
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi TT 2007 ➤
2. Description and Operation
27