Recorded Video; Starting A Retrieval Session - Honeywell Rapid Eye Common Operations Manual

Recorded Video

Starting a Retrieval Session

Site tree
status
Document 800-02328 Rev A
06/09
Click Retrieval after selecting a site (see
stream dialog appears. All of the streams are selected by default. Change the selection,
if needed. Streams from cameras are identified by a camera icon (
Specify a date From which to show recorded video and indicate At which time.
If an operator requests video from a time at which the unit was not recording, the first
image after the requested time is displayed and the later media indicator appears.
Later media is indicated by an icon (
Retrieval window. A report appears that indicates when media has been recorded. A
report occurs when a request for a date or time is beyond the video storage's limit, or
during a period of time when recording was off.
Click Full Screen , Tile Image Size
identifies all unnamed buttons on the toolbar of the video player.
View Logon and Site Selection
) that flashes in the upper-right corner of the
or Tile Best Fit , as needed. A tooltip
3
on page 5). A
).
Select the
date and time
to retrieve
video from
Date and time
of recorded
video
9