Configuring Date And Time Settings - Honeywell HRHT4041 Remote User Manual

86 | Performance Series HQA Digital Video Recorder Remote User Guide

Configuring Date and Time Settings

Click the Date & Time tab in the General settings configuration interface to open the Date &
Time configuration interface.
www.honeywell.com/security
Table 3-21 General Settings Configurations
Configuration
Startup Wizard
Navigation Bar
IPC Time Sync
Figure 3-49 Date & Time Configuration Interface
Table 3-22 Date & Time Configurations
Configuration
Date Format
Time Format
Date Separator
Time Zone
System Time
Sync PC
Time Zone
DST
NTP
Description
Click to enable/disable the Startup Wizard.
Click to enable/disable the Navigation Bar.
Using the 24-hour clock (where 10 is 10:00am and 22 is
10:00pm), configure a time at which the IPC Time Sync
occurs. At this specified time, the DVR synchronizes the IP
camera time to the DVR time.
Description
Select the date format from the drop-down list.
Select from either 24 hour or 12 hour.
Select from a period (.), a hyphen (-), or a slash (/).
Select your time zone (GMT + a number of hours) from the
drop-down menu.
Set the DVR's time. You have to Save to activate this setting.
Click to synchronize your DVR's time with your PC's time.
Select a Time Zone for the DVR.
Click to enable Daylight Saving Time (DST). Click to select a
type, either Date or Week. Then configure a date and time
when DST begins and ends.
Click to enable the NTP server.