User Management - Honeywell FUSION User Manual

FUSION DVR Digital Recording and Transmission System
5.9 ADMINISTRATION, CONTINUED
5.9.1

USER MANAGEMENT

The User Management Console has options for creating, editing, and deleting user
accounts. Each user account can be assigned different privileges that limit their usage
of the DVR system. Users can be given administrator privileges by enabling all rights,
however only the true administrator account can log into the User Management
Console
1
2
3
4
5
NOTE:. Every DVR comes with an Administrative account and Default account loaded
on them. The Default account should not be used as the primary account. Upon a
reboot of the unit for any reason the Default account will automatically be loaded. For
applications where maximum security is essential, it is recommended that all privileges
be stripped from the Default user account and all cameras be set to Forbidden.
5–28
User Enter the User
Information and
Information
Password.
Permission Used to specify
the types of
permissions a
user may perform
on the DVR.
User Rank This option
defines hierarchal
privileges when
conflicts arise with
PTZ and Setup
access. (one
being the highest
priority)
Forbidden Allows an
Camera administrator to
hide certain
cameras from a
user. The user will
not be able to view
the cameras in
Live Mode.
Select Site (Only used with the Central User Management software). This
option defines the DVRs to which the User has access.
1
2
3
4
5