74 | Performance Series HREP2 DVR User Guide
User Management Options
You can add a user account(s) that can be edited at a later time.
1.
2.
3.
4.
Adding a User Account
1.
2.
www.honeywell.com/security
From SYSTEM SETUP
Figure 4-23
User Management Options
Use the
, and ENTER buttons on the remote control or use the mouse to add
,
,
,
a user account or select an item that you want to edit.
To apply the change, click APPLY at the bottom of the screen.
When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.
Click ADD at the bottom of the User Management screen (see
Use the
and
,
,
,
press ENTER to select the item.
•
USER ID: Enter the user ID using the virtual keyboard.
•
PASSWORD: With the virtual keyboard, enter the password.
•
GROUP: From ADMIN, MANAGER and USER, select a group that the user belongs
to.
•
EMAIL: Type in the e-mail address to which you will receive notification of an event if
it occurs.
•
EMAIL NOTIFY: Choose whether you will receive notification of an event if it occurs.
Note
To use EMAIL NOTIFY, a sendmail server and its port should be previously
configured.
USER, select MANAGEMENT (see
buttons on the remote control and move to a desired item. Then,
Figure
4-23).
Figure
4-24).