Searching And Playing Back Video By Event - Honeywell HRGX45 User Manual

72 | HRGX DVR User Manual

Searching and Playing Back Video by Event

You can search for and play back video recorded during alarm input and motion detection
events. Channel switch is supported. For information on configuring alarm input and motion
detection settings, see
Settings,
To search for and play back video by event:
1.
2.
3.
www.honeywell.com/security
Configuring Alarms Inputs,
page 89.
Go to Menu > Clip Search > Event.
Under Event, configure the following search parameters:
• Event Type Select Alarm Input or Motion.
• Start Time Select the date and time for the start point of the search.
• End Time Select the date and time for the end point of the search.
Do one of the following:
• If Alarm Input was selected as the event type, select the alarm input(s) you want to
search from the list, or click Alarm Input No. to select all the alarm inputs.
• If Motion was selected as the event type, select the channel(s) you want to search
from the list, or click Analog to select all the channels.
page 84, and Configuring Motion Detection