Event Recording Settings; Email Settings - Honeywell MAXPRO Operator's Manual

C O N F I G U R I N G M A X P R O N V R
3
To configure the general system settings
1.
Note:
E
VENT
The event recording settings enable configuring of the times associated to video motion
detection and user based recording.
2.
Note:
E
MAIL
The email settings enable configuring of the SMTP server settings for email communication of
events.
3.
Note:
38
Under General Settings
• The Device Address displays by default. You can type a new device address as
applicable.
• The Device Name displays by default. You can type a new device name as
applicable
• The Description of the device displays by default. You can type a new description as
applicable.
The information in the Device Address and the Device Name fields is
mandatory.
R S
ECORDING ETTINGS
Under Event Recording Settings
• The Pre-event Time (the length of time (in seconds) recording takes place before
motion is detected) and displays by default. Select a new Pre-event Time as
applicable.
• The Record for (the length of time (in seconds) recording takes place after motion is
detected) displays by default. Select a new Record for Time as applicable.
• The User based Recording Time (duration for which the recording is done after the
user action) displays by default. Select a new User based Recording Time as
applicable. The user based recording is the recording initiated by the user manually
and is applicable for all the cameras connected to MAXPRO NVR.
To start user based recording, right-click the panel displaying live video and click
Start Recording. To stop the recording, right-click the panel displaying live video
and click Stop Recording.
S
ETTINGS
Under Email Settings
• Type the SMTP Server Name.
• The Port displays by default. Type a new Port number as applicable.
• Type the User Name of the user.
• Type the Password of the user.
Select the Use Default Credentials check box if you want to use the credentials
that are used while logging on.
MAXPRO NVR Operator's Guide