Table of Contents
Advertisement
Schedule
______________________________________________________________________________________________
Document 800-06801 Rev F
02/13
Set the recording schedule for each camera:
1.
Press MENU on the front panel or remote control.
or
Click MENU on the Mouse-over menu and select SETUP.
2.
Select RECORD > SCHEDULE.
3.
Select a camera to create a recording schedule, or select ALL.
4.
Select the check box of the desired RECORD MODE.
5.
Click hour block or the day of the week to set the entire day.
NO
No recording.
RECORDING
Even if you set recording frames and select ON in
No Color
RECORD > CAMERA, the DVR will not record anything if
you set OFF in RECORD > SCHEDULE.
CONTINUOUS
CONTINUOUS recording.
Yellow
MOTION
MOTION-detection recording.
Green
In this mode, the DVR records only when motion is
detected in the motion area, and stops recording when
motion is not detected. Adjust motion area settings in
RECORD > MOTION/EVENT CONFIGURATION > INPUT.
If you set motion to OFF in RECORD > MOTION /EVENT
CONFGURATION and set CONT + MOT in SETUP >
RECORD > SCHEDULE the DVR will NOTrecord when
motion is detected.
HRDP H.264 Rev B DVR User Guide
45
Advertisement
Table of Contents
