Camera Recording Schedule Setup - Honeywell HNDR series User Manual

4. Camera Recording Schedule Setup

3
Specifying recording schedule by camera will enable saving images by day of the week and
time zone.
1
[Recording schedule]
• Normal: Records all the images from the camera.
• Sensor recording: Records images only when there is a sensor occurs.
• Motion Recording: Records images only when there is motion.
• Not recording: Just displays images, but not recording.
• Sensor/Motion recording: Stores images only when there is an occurrence of sensor or motion.
• Event recording: You may set to record images in accordance with recording volume
adjustment when there is no motion, but otherwise to the maximum.
2
[Remote notify schedule]
• Allows you to transmit data on the HNDR-Net system during the scheduled time zone or day of
the week. (Available for Motion and Sensor setup only.)
• Setup: Specify the desired time zone or day of the week.
• Clear: Deletes set schedules.
3
[Select All]
• If click this, Every of settings in "Schedule" becomes same as for all of camera.
• This button is effective when all of settings for all camera shall be same as setting in No. X
Caution 8. Motion recording – Set to Motion recording by default.
!
1
2
Recording motion occurs depending on the Motion detection area/sensitivity
settings. Please note that the larger the setting for adjusting change
volume/rate is, the larger the data to record becomes (V1.120 higher).
For more information, see p. 35.
34