Downloading A Configuration File To An Acuix Dome; Identifying The Model Of The Acuix Dome - Honeywell Rapid Eye System Administration Manual
Hide thumbs
Also See for Rapid Eye:
- Administrator's manual (294 pages) ,
- System administrator manual (264 pages) ,
- Operator's manual (150 pages)
Table of Contents
Advertisement
Pan, Tilt, and Zoom (PTZ) Setup
Downloading a Configuration File to an ACUIX Dome
Identifying the Model of the ACUIX Dome
110
Save. Copies a file from the Rapid Eye Multi-Media unit to the operator's PC. See
Backing Up an ACUIX Configuration File to a
Delete. Click to delete a selected file. Click Yes on the confirmation dialog box to remove
the file from the Rapid Eye Multi-Media unit. This does not remove the information from an
ACUIX dome.
Refresh. Click to update the report in the Manage Files dialog box.
Close. Closes the Manage Files dialog box.
Using LocalView
A configuration file for an ACUIX dome can also be saved to a Rapid Eye Multi-Media unit
by using LocalView. See the LocalView context-sensitive Help for more information.
After
Backing Up an ACUIX Configuration File to a
configuration file to another ACUIX dome of the same make and model.
1.
Run a
Maintenance
Session.
2.
On the Serial tab, select the port to which the Intellibus device was assigned.
3.
Click Discover to update the table of ACUIX domes.
4.
Select one or more ACUIX domes. To select all of the cameras listed, click the
checkbox at the top of the Name column (see
5.
Click Download to Camera. A standard file opening window appears, showing the
drives and folders available on the operator PC.
6.
Select a configuration file (*.bin) for the ACUIX dome.
7.
Click Open. The configuration file is downloaded to the ACUIX dome.
Caution
Do not upload an ACUIX configuration file from one model of ACUIX to
another. For example, the configuration from an ACUIX dome with a FCB
EX480C camera should not be uploaded to an ACUIX dome with a
VK-S654 camera. For the procedure identify a camera, see
Model of the ACUIX
Honeywell recommends identifying the model of the camera in ACUIX domes, to avoid
uploading an ACUIX configuration file from one model of ACUIX to another.
1.
Run a
Maintenance
Session.
2.
Click the Video tab.
3.
Click PTZ.
PC, page 109, above.
PC, page 109, you can copy that
Figure
Dome, next.
step 8
6-15).
Identifying the
of
Advertisement
Table of Contents
