Clearing The Output Current Peak-Hold Value - NF DP Series Instruction Manual

3. Basic Operation

3.4.12 Clearing the Output Current Peak-hold Value

The output current peak-hold value is the maximum absolute value of the measured output current
peak value, which is then updated appending signs and held. This held value can be cleared. After
the held value is cleared, it is updated with the value measured after that. The held value is cleared
when the power is turned off.
 Operation procedures using soft-keys
1. Press the [Measure] soft-key and select [2:Measure]. The [Measure] window opens.
2. Move the cursor to [Exec] of the [Ipk-H Clr] item and press the ENTER key.
3. Close the window. For how to close the window, see 3.3.4.
72 PROGRAMMABLE AC POWER SOURCE