2. Preparation before Use
2.1
Check before Use
Check the safety.
To ensure equipment operator's safety, be sure to read the following sections of the instruction
manual.
Safety Precautions (Page ii)
2.4 Grounding and Power Connections
Check the appearance and contents.
If there is any problem, contact the seller (NF Corporation or our agent) from whom you purchased
this product.
Appearance check
Make sure that there is no damage or dent made during the transportation on the LCD screen,
keys, jog, or shuttle of the control panel, or rear connectors.
Contents (main unit and accessories) check
The contents are listed in Table 2-1. Make sure that all of the main unit and accessories are
included.
Main unit
Main unit
Instruction Manual
CD-ROM
Accessories
Ferrite core (large) (multi-phase model only)
Ferrite core (small) (multi-phase model only)
Cable tie (multi-phase model only)
Stabilizer (only for DP series model of 7.5 kVA or higher and
Note: Refer to Figure 2-2 and assemble the stabilizer, because it is necessary to ensure stability of DP series
and DP series Type R.
10
Table 2-1 List of Content
Content
Contents: Control Software for DP Series, LabVIEW Driver,
Instruction Manual (Remote Control), Control Software for
DP Series Instruction Manual
DP series Type R model of 6 kVA or higher)
PROGRAMMABLE AC POWER SOURCE
Quantity
1
1
1
2
1
2
1