Saving Simulation - NF DP Series Instruction Manual

4. Advanced Operation
3. When [Stop] soft-key is pushed while simulation is executed, the execution transitions to the
output that is set in the Initial Step, and then simulation is terminated.
-------- Notes ------------------------------------------------------------------------------------------------------------
 In the output off state, the simulation cannot be started.
 The output on/off phase setting is invalid for the Simulation.
-----------------------------------------------------------------------------------------------------------------------------
 Returning to Simulation Edit View
If you push the [Edit] soft-key, the execution transitions back to the Simulation Edit View.

4.3.8 Saving Simulation

-------- Notes ------------------------------------------------------------------------------------------------------------
 Simulation cannot be saved in the Simulation Control View.
-----------------------------------------------------------------------------------------------------------------------------
 Saving the simulation in the internal memory
1. In the Simulation Edit View, press the select the [File] soft-key - [1: Store]. The Simulation
Store View opens.
132 PROGRAMMABLE AC POWER SOURCE