Managing Projector Setting Files; Creating A Source File; Modifying A Source File; Creating A Screen File - Christie CP2208 User Manual

Managing projector
setting files
Learn how to create and modify the projector settings files.

Creating a source file

Create source files to store resolution, offset, and aspect ratio settings for input devices.
1. On the touch panel controller (TPC), select Menu > Advanced Setup > Source File Setup.
2. Select Save As.
3. In the Filename field type a name for the source file.
4. Select OK.
5. Enter values in these areas:
• Resolution—The X and Y resolution of the incoming signal. For example, 2048 (X) and
858 (Y) or 1920 (X) and 1080 (Y). The resolution must match the incoming signal format.
• Offset—The amount of incoming data to discard. Set the values to zero to process all
incoming data. The allowable X range is -4096 to 4096 pixels and Y range of -2160 to
2160 pixels.
• Aspect ratio—The aspect ratio for the incoming signal. The allowable range is 0 to 7.99.
6. Select Save.

Modifying a source file

You can change the settings in a source file after it is created.
1. On the touch panel controller (TPC), select Menu > Advanced Setup > Source File Setup.
2. From the Current Source File list, select the source file to edit.
3. Modify the Resolution, Offset, or Aspect Ratio values.
4. Select Save.

Creating a screen file

Use screen files to define the size of the display panel and image cropping.
The same screen file can be assigned to multiple input devices.
1. On the touch panel controller (TPC), select Menu > Advanced Setup > Screen File Setup.
2. Select Save As.
CP2208 User Guide
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
49