Modifying An Existing Lamp File; Enabling Or Disabling Liteloc On A Lamp File; Adjusting Lamp Power; Changing The Lamp Power Percentage - Christie CP2208 User Manual

Modifying an existing lamp file

Change any of the settings previously defined for a lamp.
1. Select Menu > Advanced Setup > Lamp Power / LiteLOC Setup.
2. Select a lamp file in the Current Lamp File list.
3. Modify the lamp file settings.
4. Select Save. If you want to revert your changes, select Revert before you tap Save.

Enabling or disabling LiteLOC on a lamp file

LiteLOC ™ is a power control algorithm that increases the power level to maintain lamp brightness as
the lamp ages.
1. Select Menu > Advanced Setup > Lamp Power / LiteLOC Setup.
2. From the Current Lamp File list, select a lamp file.
3. Do one of the following:
• To enable LiteLOC, select Enable LiteLOC.
• To disable LiteLOC, clear the Enable LiteLOC check box.
4. Select Save.

Adjusting lamp power

1. Select Menu > Advanced Setup > Lamp Power/LiteLOC Setup.
2. Increase or decrease the Power % value.
3. Select Set Target.
4. Select Enable LiteLOC.

Changing the lamp power percentage

Entering a new Lamp Power percentage temporarily disables LiteLOC settings.
1. Select Menu Advanced Setup Lamp Power/LiteLOC Setup.
2. Increase or decrease the Power % value.

Viewing lamp information

View the information collected on previously used lamps.
1. Select Menu Advanced Setup Lamp History.
2. Review the information displayed in the history.
CP2208 User Guide
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Managing lamp information
42