Creating A New Lamp Power/Liteloc ™ File; Modifying An Existing Lamp Power/Liteloc ™ File; Deleting A Lamp Power/Liteloc ™ File; Configuring Notifications For Lamp Alarms - Christie CP2308 User Manual

c) Turn the screw slowly clockwise or counterclockwise until you determine the highest value.
d) Remove the hex driver and repeat steps a to c to adjust the Z and X axis.
7. Verify the value in the Intensity field is greater or equal to the required lamp power
percentage. If value is lower, repeat steps 5 and Step 6.
Creating a new Lamp Power/LiteLOC
Create a new Lamp Power/LiteLOC
1. In the left navigation menu, tap Lamp Settings > Lamp Power/LiteLOC Setup.
2. In the Lamp Power/LiteLOC
3. In the Create dialog, type the name for your new file and tap Create.
4. Under Lamp Power, tap the plus and minus signs to select the power setting for the lamp.
5. Tap Save.
Modifying an existing Lamp Power/LiteLOC
Modify the settings in the Lamp Power/LiteLOC
1. In the left navigation menu, tap Lamp Settings > Lamp Power/LiteLOC Setup.
2. In the Lamp Power/LiteLOC
3. Under Lamp Power, tap the plus and minus signs to modify the power settings for the lamp.
4. Tap Save.
Deleting a Lamp Power/LiteLOC
Delete a Lamp Power/LiteLOC
1. In the left navigation menu, tap Lamp Settings > Lamp Power/LiteLOC Setup.
2. In the Lamp Power/LiteLOC
3. Tap Delete.
4. To confirm the deletion, tap Delete.

Configuring notifications for lamp alarms

Select the options to receive notification for lamp expiration, lamp half-life, and LiteLOC
issues.
1. In the left navigation menu, tap Service Setup > Preferences.
2. Tap Alarm Triggers.
3. In the right pane, choose from the following options:
• To receive notification of that the lamp is approaching expiration, tap the Lamp
Expiration slider.
CP2308 User Guide
020-102535-03 Rev. 1 (08-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
file to save lamp power settings for different content.
™
™
Setup pane, tap Create.
file to change lamp power.
™
™
File list, select the lamp file to modify.
file when it is no longer required.
™
™
File list, select the file to delete.
Managing lamp settings
™
file
™
file
™
™
file
performance
24