Refitting the battery
Important
When battery must be refitted, ALWAYS contact
a Ducati Dealer or authorised Service Centre.
Reposition battery (3) in its seat.
Lay down the ABS positive cable (6), onto positive
cable (5) and start screw (4) on these cables.
Connect the positive cable (5), previously assembled
to ABS cable (6), to battery positive terminal, and
negative cable (7) to battery negative terminal, by
starting the other screw (4).
Tighten the terminal screws (4) to a torque of 5 Nm
+/- 10% and apply grease onto the battery terminals
to prevent oxidation.
Refit bracket (2) and cover (A) and start the two
screws (1).
Tighten the two screws (1) to a torque of 5 Nm +/-
10%.
Refit the left-hand side fairing page 247.
5
4
6
1
A
2
1
4
7
3
Fig. 175
Fig. 176
259