Ph Unit - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 1.0 Jun. 2008
[1] [2]
6.3.24

PH unit

• Do not replace the printer head unit while the power is ON.
Laser beam generated during the above mentioned activity may cause
blindness.
• Do not disassemble or adjust the printer head unit.
Laser beam generated during the above mentioned activity may cause
blindness.
NOTE
• When replace the PH unit, replace 4-color PH units at the same time.
A. Removal procedure
1. Remove the front cover.
See P.48
2. Remove the transfer belt unit.
See P.24
[1]
[3] [2]
[1]
A02FF2C037DA
CAUTION
[3] [2] [3] [2] [3]
A02EF2C074DA
6. Remove two screws [1], and remove
the fusing unit [2].
NOTE
• When removing the fusing unit,
hold the parts shown on the picture
on the left so that it would not fall.
3. Remove four screws [1] and discon-
nect three connectors [2], and
remove four imaging unit guide rails
[3].
6. Other
55