Konica Minolta bizhub C200 Service Manual page 238

Field Service Ver. 1.0 Jun. 2008
Bit
2 Disable SMTP reception
1 TSI information for SMTP reception
Specify whether to describe the machine
name (or IP address (or destination SIP-FAX
number for SIP-FAX) if none) of the TSI in
subject or to prioritize the IP address (or des-
tination SIP-FAX number for SIP-FAX) when
forwarding documents received by Internet
FAX (IP-TX) or SIP-FAX.
This setting is applied also for the priority
order of display of destination name informa-
tion of the RX activity report for Internet FAX
(IP-TX) reception, SIP-FAX reception, and IP
relay reception.
NOTE
• For actually calling ports G3-1 and G3-2, see "Select PSTN port automatically
(MODE 043 Bit 1)".
Mode
352
State
Bit
7 Notification of result (Network function)
6 Position for adding Gateway TSI
5 Specify whether to add TSI when forwarding
4 Position for adding TSI when forwarding
Setting item
Default value
Bit 7654 3210
1101 0000
Setting item
Setting value
0 1
Specify allowed or not
allowed for SMTP recep-
tion.
Enable Disable
(for Internet fax(IP-TX),
SIPFAX, Internet fax (IP
relay) reception)
Machine IIP
name pri- address
ority priority
HEX: D0
Setting value
0 1
Specify whether a com-
munication error message
is returned to the sender
No Yes when a communication
error occurs with code
E6xxxx when e-mail is
received.
Specify where to add the
Outside
Inside of TSI when forwarding
of docu-
document through gateway trans
ment
mission (IP relay).
Specify whether to add
Not add Add TSI when forwarding
received documents.
Outside Select where to add the
Inside of
of docu- TSI when forwarding
document
ment received documents.
10. Service Mode
Description
Description
199