Field Service Ver. 1.0 Aug. 2006
5.3.13
PH unit
• Do not replace the PH unit while the machine is turned ON.
The laser beam that may be emitted can blind you.
• Do not attempt to disassemble or adjust the PH unit.
The laser beam that may be emitted can blind you.
(1) magicolor 2500W
1. Remove the rear cover.
See P.31
2. Remove the right cover.
See P.33
3. Remove the left cover.
See P.32
4. Remove the front cover.
See P.33
[3]
[2]
NOTE
[1]
A00VF2C566DA
[1]
A00VF2C567DA
5. Disconnect the connector (PJ20) [2]
and the flat cable (PJ19) [3] from the
printer control board [1].
6. Disconnect the connector (PJ306)
[1] from the printer control board.
5. Other
47