Konica Minolta bizhub C200 Service Manual page 177

8. Utility Mode
(3) SMTP Authentication Password
Functions
• Sets the SMTP authentication password when using SMTP authentication function.
Use
1. Touch [Network Settings] → [SMTP RX Settings] → [SMTP Authentication Pass-
Setting/
Procedure word].
2. Set the password on the 10-key pad or the screen keyboard, and touch [OK].
(4) Exception Setting
Functions
• To set the IP address area which is exceptionally not authenticated for SMTP authen-
tication.
Use
1. Touch [Network Settings] → [SMTP RX Settings] → [Exception Setting].
Setting/
Procedure 2. Touch [1]. (When more than one exceptional settings are to be made, they can be
set to [2] and [3].)
3. Enter the IP address for start and finish using the 10-key pad, and touch [OK].
F. POP3 Settings
(1) POP3 Server Address
Functions • To set the POP server address.
Use • To enter the POP server address.
1. Touch [Network Settings] → [POP3 Settings] → [POP3 Server Address].
Setting/
Procedure 2. Enter the POP server address using 10-key pad.
3. Touch [Port], and set the port number.
(2) POP3 User Name
Functions
• To set the user name for authentication with POP3 server.
Use
1. Touch [Network Settings] → [POP3 Settings] → [POP3 User Name].
Setting/
Procedure 2. Enter the user name on the screen key board or 10-key pad, and touch [OK].
(3) POP3 Password
Functions
• To set the password for authentication with POP3 server.
Use
1. Touch [Network Settings] → [POP3 Settings] → [POP3 Password].
Setting/
Procedure 2. Touch [New Password].
3. Enter the new password using the 10-key pad or the screen keyboard, and touch
[OK].
4. Touch [Confirm New Password], and enter the password again for confirmation.
(4) Auto-RX Check
Functions
• To set the intervals for auto checking on receiving e-mails with POP3.
Use
Setting/ • The default setting is Check OFF.
Procedure
138
Field Service Ver. 1.0 Jun. 2008
"Check OFF", 1 to 99 M.