Printer Resist Loop - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 1.0 Jun. 2008
10.3.5

Printer Resist Loop

Functions • To set the correction value of the paper loop length for each process speed of tray 1,
tray 2 to tray 4 / LCT, bypass, and duplex.
• To adjust the length of the loop formed in paper before the registration rollers.
• Use "Paper Passage" for paper passage check.
Use When a paper skew occurs.
When a paper misfeed occurs.
Adjustment To decrease the loop amount: Decrease the setting value
Instructions To increase the loop amount: Increase the setting value
Adjustment • The adjustable range is different depending on paper source and processing speed.
Range
92 mm/sec
46 mm/sec
Setting/ 1. Call the Service Mode to the screen.
2. Touch [Machine Adjustment] → [Printer Resist Loop].
Procedure
3. Select a paper source and a processing speed where the settings are made by
touching the corresponding keys.
4. Enter the new setting from the [+] / [-] keys and touch [OK].
Tray 1 Tray 2/3/4 LCT
-10 to +10 -10 to +10
-15 to +15 -15 to +15
10. Service Mode
Manual Duplex
-10 to +10 -10 to +10
-15 to +15 -8 to +8
161