Konica Minolta bizhub C200 Service Manual page 589

6. Mechanical adjustment
[1]
A
B
10. After the adjustment, tighten the four screws that hold the hinges.
42
8. Loosen the four mounting screws [1]
[1]
A0EYF3C506DA
9. Move the reverse automatic docu-
[1]
• When the amount of deviation is a
positive value, move it in the direction
A.
• When the amount of deviation is a
negative value, move it in the direction
B.
A0EYF3C507DA
Field Service Ver. 1.0 Jun. 2008
of the left hinge as viewed from the
rear.
ment feeder in either direction shown
by the arrows and select an appro-
priate graduation line [1].