Konica Minolta bizhub C200 Service Manual page 305

10. Service Mode
10.9.5 Color Reproduction
Functions • To produce a color reproduction pattern.
Use • To be used to check the color reproduction.
Pattern
Setting/ • Copies ("1" to 999)
Procedure • Select "SINGLE" (single copy) or MULTI (multi copy).
• Select FEET or "HYPER."
• Select "Gradation" or Resolution if HYPER has been selected.
10.9.6 Running Mode
Functions • To test the printing operation in running mode.
Use • Use to check the printing operation in running mode from each paper source.
Setting/ 1. Call the Service Mode to the screen.
2. Touch [Test Mode] → [Running Mode].
Procedure
3. Select the paper tray.
4. Select the paper type.
5. Press the Start key to start the running mode.
6. Pressing the Stop key will stop operation.
10.10 Fax Settings
10.10.1 Self-Telephone #
• It is displayed only when bit2 for the mode 043 is set to "1" by the following setting:
[Service Mode] → [System] → [Software Switch Setting].
See P.25 of the FK-507 service manual.
10.11 Download Firmware
Functions • To download and rewrite the engine firmware data.
Use • Use to download and rewrite the engine firmware data of the main body or the job
separator.
Setting/
See P.31
Procedure
266
Field Service Ver. 1.0 Jun. 2008
SINGLE
HYPER
Gradation
Density: 255
A02FF3C525DA