Feed Roller - Konica Minolta bizhub C200 Service Manual

2. Other
2.3.4

Feed roller

1. Remove the rear right cover. (Remove the right lower cover for 4th row.)
See P.5
2. Remove the tray3. (Remove the tray4 from 4th row.)
3. Remove the paper separation roller mounting bracket assy.
See the procedures 1 to 3 in P.6 "Separation roller assy."
[1]
[2]
8
[2]
[1]
A093F2C002DA
[2]
A093F2C003DA
[1]
A093F2C004DA
Field Service Ver. 1.0 Jun. 2008
4. Disconnect the connector [1] and
remove the harness from two wire
saddles [2].
5. Remove four screws [1] and remove
the feed unit [2].
6. Remove two screws [1] and remove
the mounting frame [2] for the paper
separation roller mounting bracket
assy.